STAINLESS STEEL 904L PIPE FITTINGS
Stainless Steel 904L Pipe Fittings are made up of the chromium nickel molybdenum alloy and are used to connect piping components together. The fittings are strong and have minimum tensile strength of 490MPa and minimum yield strength of 220MPa. The pipes can be made seamless, welded or fabricated.Mahalaxmi Steel is a manufacturer and supplier of all types of pipes in this material grade. Our 904L Stainless Steel Buttweld Fittings are the common form of fittings and they are manufactured through a buttweld procedure. The fittings can range from 1/8 inches to 48 inches in nominal bore size. There are different standards such as the ASTM B366 to govern these pipe sizes. The Stainless Steel UNS N08904 Pipe Elbow is used to connect two pipes together in an angle to change the direction of flow.
Depending on the customer’s end-use requirements, cutlery alloys such as these Stainless Steel 904L End Cap are usually selected with respect to heat treating response, mechanical properties and fabricating characteristics. While Stainless Steel 904L Stub End can be machined in the annealed condition, it tends to perform better in the cold drawn or heat treated condition. For solution annealing in SS 904L Bend, slow controlled cooling from 1500 Degree F / 1600 Degree F, and for hardening, heat up to 1700 Degree F / 1850 Degree F, further quench in air or oil. For maximum corrosion resistance to chemical environments, SS 904L Reducer is essential that the stainless steel surface be free of all heat tints or oxide formed during forging, annealing, or heat treating. Applications requiring moderate corrosion resistance and high mechanical properties are ideal for this Stainless Steel 904L Cross.
Alloy 904L Butt Weld Fittings is proposed for the usage of under strict corrosive forms, where it has been claim and verified over years and was initially formed to resist corrosion in watery sulfuric acid. Structurally, Alloy 904L Pipe Fittings is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Though pipe can at times be more costly, its augmented ability to endure pressure lets you to use 904L Stainless Steel Pipe Fittings that are lighter and thinner, which assists to cut down on expenditures.
SS 904LPipe Fittings
We Supply SS 904LThreaded Forged Fittings in Sharjah, Seoul, Lagos, Toronto, Secunderabad, Faridabad, Chiyoda, Rajkot, La Victoria, Vadodara, Indore, Cairo, Calgary, Melbourne, Baroda, Courbevoie, Jeddah, Mumbai, Montreal, Rio de Janeiro, Tehran, Perth, Thane, Brisbane, New York, Hanoi, Ho Chi Minh City, Los Angeles, Noida, Thiruvananthapuram, Hyderabad, Houston, Howrah, Petaling Jaya, Ludhiana, Vung Tau, Algiers, Kanpur, Edmonton, Ulsan, Colombo, Visakhapatnam, Caracas, Gimhae-si, Atyrau, Santiago, Granada, Surat, Aberdeen, Coimbatore, Busan, Kolkata, Jamshedpur, Moscow, Pune, Muscat, Jakarta, Doha, Singapore, Bengaluru, Geoje-si, Lahore, Pimpri-Chinchwad, Al Khobar, New Delhi, London, Dallas, Nagpur, Kuwait City, Bogota, Bhopal, Gurgaon, Jaipur, Ahvaz, Haryana, Al Jubail, Mexico City, Manama, Riyadh, Sydney, Kuala Lumpur, Ernakulam, Ranchi, Nashik, Dammam, Abu Dhabi, Bangkok, Karachi, Ahmedabad, Ankara, Milan, Port-of-Spain, Chandigarh, Istanbul, Dubai, Chennai, Madrid, Navi Mumbai, Hong Kong.
Specification Chart of Alloy 904L
| Specifications | ASTM B366 / ASME SB366 |
|---|---|
| Size | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | Seamless / Welded / Fabricated |
Stainlesss Steel 904L Pipe Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | AFNOR | BS | KS | EN |
| SS 904L | 1.4539 | N08904 | SUS 890L | Z2 NCDU 25-20 | 904S13 | STS 317J5L | X1NiCrMoCu25-20-5 |
| Grade | C | Mn | Si | P | S | Cr | MO | Ni | CU | |
| 904L | Min | – | – | – | – | – | 19.0 | 4.00 | 23.00 | 1.00 |
| max | 0.20 | 2.00 | 1.00 | 0.045 | 0.035 | 23.0 | 5.00 | 28.00 | 2.00 |
SUS 904L Pipe Fittings Physical properties :
| Grade | Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Co-eff of Thermal Expansion (µm/m/°C) | Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Elec Resistivity (nΩ.m) |
|||
| 0-100°C | 0-315°C | 0-538°C | At 20°C | At 500°C | |||||
| 904L | 8000 | 200 | 15 | – | – | 13 | – | 500 | 850 |
TYPES OF Pipe Fittings
